BuzzFAQ> > >  Machine HelpFiles> > >  BuzzManual > > >  BuzzMusic> > >  BuzzMachines> > > 

CyanPhase SongInfo


a simple information keeper that you can use.
the album pic can store JPGs.

CyanPhase AtomStereoMeld

This simple effect "melds" the stereo signal towards the
middle, you can also set the gain for each channel.
can be used to lessen the stereo effect of some of
buzz's delays.

It also allows for simple centre panning cancelation
(known as vocals removal) and some other effects.

CyanPhase AutoDC Blocker

1.1 - Added some stuff in attributes

Fixes a variety of DC problems automatically.
This simple type of filter is heavily used in
physical models for correcting waveguide DC problems.
It's a stereo effect too.

CyanPhase AuxReturn

This is basically a stereo AuxReturn, to use AuxBus in a stereo way with
this effect, use two AuxSends, one for the left, the other for the right.
And set the channels on the AuxReturn as appropriate.

CYANPHASE M-DERIVE ][

Uses the 2001 utility skin
Type: Effects -> (Other Effects) Mathematics

This new version of the older effects take into account
sample rates, tweek with stereo ratios to give more "space"
and allows the DC corrector to be turned on or off.

Parameters:
Left Ratio Controls the amount of "derivation" on the
left channel
Right Ratio Controls the amount of "derivation" on the
right channel

Attributes:
CorrectDC Uses an internal DC correction filter to
correct possible DC problems

CYANPHASE M-INTEGRAL ][

Uses the 2001 utility skin
Plugin: Buzz Effect Plugin
Type: Effects -> (Other Effects) Mathematics

This new version of the older effects take into account
sample rates, tweek with stereo ratios to give more "space"
and allows the DC corrector to be turned on or off.

Parameters:
Left Ratio Controls the amount of "integration" on the
left channel
Right Ratio Controls the amount of "integration" on the
right channel

Attributes:
CorrectDC Uses an internal DC correction filter to
correct possible DC problems

CyanPhase Mono

simple machine that makes stereo inputs into a mono output.

how to use:

[stereo out] -> [mono] -> [mono in]

note: this simple machine only accepts stereo inputs just
because i'm a little lazy to figure out how to know for sure
if the inputs are stereo or not. routing mono sounds in it
however might be useful for some sort of distortion ;)

note 2: when you add a second machine (or more), a hoax box
will appear with 3 buttons (standard switch thing), click on
the "Switch to stereo" button and things will be alright. clicking
on the left\right mono buttons wont help but give you that
distortion sound.

the source is included also.

CYANPHASE KRASHBOX

This Effect is basically a strange sort of distortion, with
one gate modulator, 2 ring modulators, a filter, and a mixer.

You can do a variety of things with it. such as android voices,
heavy distortion, and other thing.

GMod:Amplitude - Amplitude of the gate modulator sine wave.
GMod:Frequency - Frequency of the gate modulator sine wave.
GMod:Unipolar - specifies if samples are allowed on only one
side of the dc center.
GMod:Repulsion - are samples pushed (gated) towards the inside
or the outside of the modulated sine wave.
RMod1:Gain - Ring modulator's amplitude\gain
RMod1:Frequency - Ring modulator's frequency

Same applies with RMod2
Filter:Type - Type of filter used
Filter:CutOff - Cutoff frequency of the filter
Filter:Resonance- Resonance applied to the cutoff frequency, or
bandwidth of the band
Mix:Left - Left mix
Mix:Right - Right mix

Edward Blake
Cyanwerks.com