BuzzFAQ> > >  Machine HelpFiles> > >  BuzzManual > > >  BuzzMusic> > >  BuzzMachines> > > 

Dimage's Detonator

Parameters:

PreAmp
Input amplification.
PostAmp
Output amplification.
AmpMode
Amplification mode. There are five choices: Off,Only Pre,Only Post, Pre + Post and Pre + prePost.
ClpMode
Clipping mode. There are six choices: No clip,Clip,Wrap, Mirror,Zero and Click. Each one produces a bit different waveform.

Attributes:

AmpScale
Amplification scale mode. May possess the following values: 0 = no amp; 1 = linear scale; 2 = logarithmic scale. It affects both preAmp and postAmp.

Dimage's Exponent Distortion

Parameters
Amp
Amplification of input signal before processing
Base
Exponent base (output signal is acquired using formula y = 1 - Base-x, where x is input signal, and y is the output signal) - it means the steepness of output signal

Dimage's HyDist

Parameters
Bypass
If this is On, the input is routed directly to the output, the signal doesn't change
UpThresh
When the signal raises above this threshold, the up shift is applied
DnThresh
When the signal falls below this threshold, the down shift is applied
UpShift
The amount of up shift
DnShift
The amount of down shift
Damp
Each next sample the shift is multiplied by this value

Dimage homepage: dimage.newmail.ru, dimagesapelkin.tripod.com

Dimage music page: www.besonic.com/dimage